Sensoray Model 611 frame grabber converts video
camera signals into digital data required for computer image processing
and display. Up to four cameras may be connected to the board: four
with composite video or three with composite video and one with an
S-video output. The 611 provides four digital input lines and four
output lines to control camera focus, pan, tilt and triggering.
Frame Rate
Model 611 can transfer 30 frames per second with the supplied software. It supports a variety of digital formats including RGB24 and Y8 that are directly compatible with Windows bitmaps.
Synchronization
The Model 611 uses special circuitry to achieve horizontal and subcarrier synchronization to incoming video. It guarantees generation of the required pixel/line from a video source in which line length can vary by several microseconds. This circuitry allows the 611 adapter to quickly and accurately lock on to video signals, regardless of source. Since the technique is completely digital, the 611 can recognize unstable signals caused by VCR head switching and adapt the locking mechanism to accommodate the source.
Image scaling
Under software control the 611 adapter can independently scale the X and Y dimensions of the captured frame. Full-resolution video may be reduced to any size down to the size of an icon. A software selectable digital filter is available to minimize aliasing artifacts induced by scaling.
A/D Conversion
The 611’s signal processor uses two flash analog-to-digital converters; one for chrominance and one for luminance. Each A/D provides 2x oversampling of the camera signal. Oversampling, combined with analog anti-aliasing filters, significantly reduces the overall sensitivity to unwanted aliasing signals and enhances the 611’s digital filtering.
The 611 is capable of sending just the luminance data to the host’s image buffer. This feature speeds capturing monochrome images.
Camera Connections
Separate BNC-style and DIN connectors are used to preserve the high frequency components of the video signals. A male header connector is used for the non-critical control signals to the camera.
Application Notes
Pixel Jitter in Frame Grabbers | Frame Grabbers: FIFO vs. Memory Buffered
Software and Manuals
The software development kit, SDK, includes a C-language sample program that allow capturing and saving color and monochrome images. It illustrates the 611’s scaling feature and shows how to call the included DLL from a C program. The supplied 32-bit DLL supports interrupts and multiple DMA buffers that may be scattered within the host’s memory. The DLL supports capture directly into video memory and graphic overlays when using Direct Draw (only supported with enhanced SDK).
An optional DOS driver, x11DOS, includes a C++ application program.
Linux, Windows CE and QNX are available.
An enhanced development kit, SDK11E, includes more sample applications. It supports Direct Draw and the ability to store a color and monochrome image. SDK11E is sold separately for $ 95.
Active-X control software and VCL software are available from Signal Corporation.
Specifications
| Capture rate |
30 frames/sec (NTSC, RS-170, CCIR) | 25 frames/sec (PAL, SECAM) |
| A/D resolution |
8-bits for luminance | 8-bits for chrominance |
| FIFO size |
560 bytes (280 pixels) |
| Output resolution |
768 x 576 (PAL, SECAM) | 640 x 480 (NTSC, RS-170) |
| Y bandwidth error |
0.6 dB |
| Board size |
4.80” x 3.55” |
| Output format |
Several |
| Input power |
5 volts at 330 mA |
| Number of cameras |
NTSC per channel frames/sec |
PAL per channel frames/sec |
| 1 |
30 |
25 |
| 2 |
8 |
6 |
| 3 |
3 |
2 |
| 4 |
1 |
1 |
Images and Mechanical Drawings
Prices
| Model 611 |
PCI frame grabber |
Qty. 1 $120 |
Qty. 2-9 $109 |
| Model 610C3 |
1meter coax video cable |
Qty. 1 $27 |
Qty. 2-9 $27 |
| Model 610C2 |
Y/C (S-video) 1 meter cable |
Qty. 1 $40 |
Qty. 2-9 $40 |
| Model SDK11E |
Enhanced software kit |
Qty. 1 $95 |
Qty. 2-9 $95 |
| Model x11DOS |
Optional DOS driver |
Qty. 1 $300 |
Qty. 2-9 $300 |
