Difference between revisions of "1012 TORADEX"

From Sensoray Technical Wiki
Jump to: navigation, search
Line 15: Line 15:
 
# RS-232 adapter for the Ixora board
 
# RS-232 adapter for the Ixora board
 
# microSD card reader for host computer
 
# microSD card reader for host computer
 +
 +
=== Updating the 3.10 kernel, V2.4 Toradex version for the Apalis iMX6 ===
 +
==== Preparing microSD card ====
 +
 +
Attach a microSD card to your host system.  The microSD card should be formatted with the FAT32 system and with standard DOS partition.  On Linux, this is done with fdisk and mkfs.vfat.  Their use is describe elsewhere.  The easiest method would be to format the card on a Windows machine first.
 +
 +
Follow Step 1 only of the preparation procedure described here and with the additional details below:
 +
 +
[http://developer.toradex.com/knowledge-base/flashing-linux-on-imx6-modules Flashing Linux on IMX6 Modules]
 +
 +
# In step 1, download the Apalis iMX6 Linux Image.  In our case, we use version 2.4
 +
#* wget http://developer1.toradex.com/files/toradex-dev/uploads/media/Colibri/Linux/Images/old/Apalis_iMX6_LinuxImageV2.4Beta1_20150518.tar.bz2

Revision as of 17:22, 31 May 2017

Contents

Toradex use with Sensoray Model 1012 (and 2255)

The 1012 has been tested with the Toradex Apalis iMX6 board. Toradex provides their own support pages here. This wiki entry provides additional information for updating the kernel to support the Sensoray 1012 device. The instructions also enable the Model 2255 driver for completeness.

The Apalis iMX6 CPU provides PCIe support, needed for the 1012. Toradex also provides a convenient and recommended carrier board called the Ixora to connect the 1012 and provide other peripherals. Sensoray has tested with the iMX6Q and the Ixora V1.0A carrier board running software version V2.4 (3.10 kernel). The instructions here should be valid for future kernel versions.

In order to use the 1012 with the Toradex CPU board, you will need cross-compile a new kernel and driver modules.

Pre-requisites

  1. user should have some familiarity with kernel development and compilation
  2. C development tools installed
  3. git source countrol package installed. On Ubuntu, use "sudo apt-get install git". On Fedora, use "sudo dnf install git"
  4. microSD card
  5. Host RS-232 serial port support (or USB dongle), and cable.
  6. RS-232 adapter for the Ixora board
  7. microSD card reader for host computer

Updating the 3.10 kernel, V2.4 Toradex version for the Apalis iMX6

Preparing microSD card

Attach a microSD card to your host system. The microSD card should be formatted with the FAT32 system and with standard DOS partition. On Linux, this is done with fdisk and mkfs.vfat. Their use is describe elsewhere. The easiest method would be to format the card on a Windows machine first.

Follow Step 1 only of the preparation procedure described here and with the additional details below:

Flashing Linux on IMX6 Modules

  1. In step 1, download the Apalis iMX6 Linux Image. In our case, we use version 2.4
Personal tools
Namespaces

Variants
Actions
Toolbox